EXA C1D2 LED Flood, Low Glare
Aimed beams for gauges, panels, and paths, vibration resistant brackets.
Project field note
EXA LED C1D2 Flood Lighting for Scrubber Room Upgrade
EXA C1D2 floods reduced glare at gauges and panels, improving scrubber room visibility.
EXA LED C1D2 Scrubber Room Lighting, West Texas
Specified here
Related Products, EXA C1D2 Scrubber Room Lighting
Fixture families specified for this project. Open a category page for the full lineup and configuration data.
IR3 C1D2 Linear LED, Fill Lighting
Linear runs along walk paths and platforms, durable gasketing, service friendly design.
IR4 C1D1 Linear LED, Adjacent Rooms
Specify for nearby C1D1 spaces with correct T codes, robust sealing.
Project brief
Scrubber maintenance needed low glare, sealed illumination. We installed hazardous rated flood lights, aimed to cover valves, panels, and walk paths while resisting vibration and corrosion. The targeted optics improved task visibility and reduced glare near gauges. Crews now move confidently, spending less time fighting shadows and equipment hot spots.
Gallery, EXA LED C1D2 Scrubber Room Flood Lighting, West Texas
On site
Project Overview, EXA LED C1D2 Scrubber Room Flood Lighting, West Texas
Glare near gauges and poor coverage around valves slowed maintenance. We aimed EXA C1D2 floods for low glare task illumination over panels, walk paths, and equipment. Sealed hardware and vibration resistance improved uptime, while balanced beam placement delivered clearer sightlines across the scrubber area.
Primary product: EXA Class I Division 2 Flood Light
Low glare floods delivered targeted visibility for gauges, panels, and foot traffic around the scrubber equipment.
Task clarity: Aimed beams reduced hotspots and glare at instruments, improving readability and accuracy.
Durability: Vibration resistant mounting and sealed connections supported steady uptime.
Safety paths: Brighter walk paths and service zones improved footing and movement during maintenance.
Floods configured for hazardous areas with glare control and durability.
UL844 aligned, Class I Division 2 rating for scrubber vicinity.
Low glare optics to aid gauge readability and safe movement.
Sealed fittings, corrosion resistant housings, vibration ready brackets.
Proper thermal management supporting stable output under load.
Common questions
Frequently asked questions
These answers clarify the selection process without replacing project-specific documentation.
What made scrubber-room lighting difficult?
Glare near gauges and poor coverage around valves slowed maintenance. The space needed low-glare, sealed illumination that resists vibration and corrosion.
How were the EXA floods applied?
Aimed for low-glare task illumination over panels, walk paths and equipment, with balanced beam placement for clear sightlines across the scrubber area.
What changed for the crews?
Better task visibility with less glare near gauges — crews move confidently and spend less time fighting shadows and hot spots.
Build the specification
Send us your site conditions. We’ll recommend the right fixture.
Share the classification, temperature, ingress, mounting and timeline for a focused product conversation.