CIT2
CIT2 LED Vapor Tight , NSF, IP66 to IP67, NEMA 4X
View product pageProduct category · Wet and corrosive
Vapor tight LED fixtures for sealed wet locations.
Sealed luminaires for food plants, car washes, wastewater rooms and harsh industrial bays, where the failure mode is ingress rather than output. IP66 to IP69K enclosures with NEMA 4X construction and NSF options.
IP66 to IP69K · NEMA 4X · linear and high bay
Complete category lineup
The complete vapor tight lineup.
Browse every family in the range. Several families serve both vapor tight and food processing areas — every card opens the family's full specification page.
CIT4
CIT4 Vapor Tight High Bay LED, 2 ft and 4 ft, Wet Location
View product page
LS-VT
LS-VT Vapor Tight LED , 4 ft, Multi Watt 40 to 60 W, DLC Premium
View product page
R5 Slim Body
R5 LED Vapor Tight Light Fixture , NSF, IP66 and IP69K Washdown Rated, NEMA 4X
View product page
SL Series
Food Grade Vapor Tight LED for Washdown, SL Series, IP69K, NSF
View product pageIP69KHighest documented ingress rating
210WHighest documented wattage
8ftLongest documented run
5Documented fixture families
At a glance
Compare vapor tight families by ingress rating and length.
Ingress rating and lens choice usually decide the family before wattage does — compare those first, then match the wattage to the space.
| Model | Wattage Range | Typical Lumens | Input Voltage | Beam, Optics | Ratings | Listings |
|---|---|---|---|---|---|---|
| CIT2 | 17 to 140 W | 3,166 to 23,594 lm | Not specified | Diffuser, wide reflector, frosted lens, silver reflector | IP65, IP66, IP67, NEMA 4X | UL, NSF, RoHS |
| CIT4 | 17 to 210 W | 3,166 to 35,391 lm | Other voltages available | Diffuser, silver reflector, polycarb or frosted lens | IP65, IP66, IP67, NEMA 4X | UL, NSF, RoHS |
| LS-VT | 40 to 60 W, multi watt | 5,400 to 8,100 lm | 100 to 277 V | 110° beam, opal prismatic lens | 50,000 h, DLC Premium | ETL, DLC |
| R5 (Slim Body) | 15 to 125 W, selectable | 3,500 to 20,000 lm | 120 to 277 V standard, 120 to 347 V optional | 110° beam, milky or anti-glare lens options | IP66, IP69K, NEMA 4X, IK10 | NSF, ETL, DLC, TAA compliant |
| SL Series, Food Grade | 20 to 60 W | 2,600 to 7,800 lm | 100 to 277 V | 120° beam, linkable | IP69K, IK10, 5 yr warranty | UL Class P driver, Food grade |
Ingress ratings vary by configuration within a family. Confirm the rating against the exact catalog number rather than the family heading.
Specification path
The enclosure decides the family. Output comes second.
Confirm whether the area is wet, washdown or corrosive, and whether cleaning is manual or high pressure. Then check lens and reflector options against the task — a diffuser and a silver reflector produce very different results in the same housing — followed by voltage, mounting and any NSF requirement.
A wet location and a washdown location are not the same specification. The second implies pressure, chemistry and temperature.
Common questions
Frequently asked questions
These answers clarify the selection process without replacing project-specific documentation.
How do I choose between the CIT2 and CIT4 families?
Both are documented across 2 ft and 4 ft formats with similar ingress options. CIT4 extends further up the wattage range for high bay duty. Compare the ordered configuration against the at-a-glance table above.
Which families carry NSF listings?
The CIT2, R5 and SL families are documented with NSF options for food-grade work. Confirm the listing on the specific catalog number, since it does not apply to every configuration in a family.
Are these fixtures suitable for classified hazardous areas?
No. Ingress protection and hazardous-location certification are separate. If the area carries a class and division, review the explosion proof category instead.
Build the specification
Send us your site conditions. We’ll recommend the right fixture.
Share the classification, temperature, ingress, mounting and timeline for a focused product conversation.