Industrial LED Lighting Blog for Safer, Smarter Projects

Explosion proof lighting is built to contain internal sparks so they do not ignite surrounding gases or dust. It is required in classified hazardous locations such as C1D1, C1D2, C2D1, and C2D2 areas.

C1D1 covers locations where flammable gas or vapor is present during normal operations. C1D2 covers areas where gas is present only under abnormal conditions such as leaks or maintenance events.

UL844 verifies construction for hazardous locations. T ratings limit the maximum surface temperature of the fixture so nearby vapors remain below ignition. Always match T code to your ambient temperature and process chemistry.

UL 1598A Marine adds corrosion resistance, vibration tolerance, and sealed construction for shipboard and dockside environments. Housings, fasteners, and gasketing are designed for salt fog and spray.

Look for NSF and IP69K rated fixtures with smooth housings and sealed lenses. These withstand clean in place washdowns and resist bacterial harborage in wet production zones.

Yes, select models are rated for 60 to 80 C, 100 C, or higher. Use correct driver placement, thermal paths, and spacing to preserve lifetime in furnaces, glass, and foundry bays.

Yes, share drawings, mounting heights, ambient details, and target foot candles. We return a code minded layout with maintained illuminance, uniformity, parts list, and spacing or aiming notes.

Vapor tight fixtures with IP66 or NEMA 4X excel in wet or corrosive corridors and wash zones. High bays suit open production or warehouse spaces where higher mounting and wider optics are needed.