Product family · High Temperature
RT-IL-150C ultra high temperature LED.
The highest ambient tier documented in this catalogue — a 150 °C light head with the driver mounted remotely, from 50 W to 500 W.
RT-IL-150C configurations
Every documented RT-IL-150C configuration.
One family, every configuration: the fixture is shown at full size, with each available configuration listed below and specified line by line in the ordering table.
Ordering data
Every documented RT-IL-150C configuration.
All 7 configurations of the family are specified on this page, so you can compare wattages, outputs and options side by side.
| Model | Wattage | Typical lumens | Voltage | Beam options | CCT | Operating temp (light head) | Driver temp rating | Ratings |
|---|---|---|---|---|---|---|---|---|
| RT-IL-150C-50 | 50 W | 7,500 lm | 90 to 295 V or 347 to 480 V | 10°, 25°, 40°, 60°, 90° | 2700 to 6500 K, custom 1500 to 10000 K | -40 to +150°C (302°F) | Up to +100°C (212°F), remote mount if ambient exceeds 212°F | IP67 |
| RT-IL-150C-100 | 100 W | 15,000 lm | 90 to 295 V or 347 to 480 V | 10°, 25°, 40°, 60°, 90° | 2700 to 6500 K, custom 1500 to 10000 K | -40 to +150°C (302°F) | Up to +100°C (212°F), remote mount if ambient exceeds 212°F | IP67 |
| RT-IL-150C-150 | 150 W | 22,500 lm | 90 to 295 V or 347 to 480 V | 10°, 25°, 40°, 60°, 90° | 2700 to 6500 K, custom 1500 to 10000 K | -40 to +150°C (302°F) | Up to +100°C (212°F), remote mount if ambient exceeds 212°F | IP67 |
| RT-IL-150C-200 | 200 W | 30,000 lm | 90 to 295 V or 347 to 480 V | 10°, 25°, 40°, 60°, 90° | 2700 to 6500 K, custom 1500 to 10000 K | -40 to +150°C (302°F) | Up to +100°C (212°F), remote mount if ambient exceeds 212°F | IP67 |
| RT-IL-150C-300 | 300 W | 45,000 lm | 90 to 295 V or 347 to 480 V | 10°, 25°, 40°, 60°, 90° | 2700 to 6500 K, custom 1500 to 10000 K | -40 to +150°C (302°F) | Up to +100°C (212°F), remote mount if ambient exceeds 212°F | IP67 |
| RT-IL-150C-400 | 400 W | 60,000 lm | 90 to 295 V or 347 to 480 V | 10°, 25°, 40°, 60°, 90° | 2700 to 6500 K, custom 1500 to 10000 K | -40 to +150°C (302°F) | Up to +100°C (212°F), remote mount if ambient exceeds 212°F | IP67 |
| RT-IL-150C-500 | 500 W | 75,000 lm | 90 to 295 V or 347 to 480 V | 10°, 25°, 40°, 60°, 90° | 2700 to 6500 K, custom 1500 to 10000 K | -40 to +150°C (302°F) | Up to +100°C (212°F), remote mount if ambient exceeds 212°F | IP67 |
Confirm the exact configuration against the current manufacturer specification sheet before approval or purchase.
Engineering reference
Selecting within the RT-IL-150C family.
Confirm the ambient at the light head and, separately, that a driver location inside its own 100 °C limit is available within the cable run. Then choose wattage and beam. If a remote driver cannot be accommodated, the 100 °C RT-IL family is the alternative.
At 150 °C the driver can no longer sit with the LEDs, so this family separates the two. The light head is rated to 150 °C while the driver carries its own limit of 100 °C and mounts away from the heat. That single decision changes the installation more than any other specification in the family.
Common questions
Useful answers before the next step.
These answers clarify the selection process without replacing project-specific documentation.
Why does this family use an external driver?
The light head is rated to 150 °C — beyond the driver's own 100 °C rating — so the driver mounts remotely where the ambient is lower. Plan the driver location and cable run before installation.
What is the difference between this family and RT-IL 100 °C?
Operating temperature and driver placement. The 100 °C family integrates its driver; this one separates it to reach 150 °C. Wattage range, beam options and colour temperature range are documented the same on both.
What temperature range is the light head rated for?
The table documents −40 °C to +150 °C (302 °F) for the light head, with the driver rated to +100 °C (212 °F). Both limits need checking against their respective mounting positions.
Build the specification
Bring us the conditions. We’ll help narrow the fixture.
Share the classification, temperature, ingress, mounting and timeline for a focused product conversation.